

Open-face ICARO2000 helmet communication system with EN966 certification for Paramotor/PPG, ULM, Trike ... Keep communication on flight connecting your FM Radio
The Solar X 2 has been designed by Ignazio Bernardi, with the technical consultancy from the greatest Italian helmet developer.The result is a helmet with a very modern look. The 2 pilots pilots Piccard and Borschberg of the Solar Impulse 2 have chosen this helmet because it is light, solid, reliable and it has the certification EN 966. We are very proud to have contributed to this incredible mission, so we called the helmet "SOLAR X" in honor of this unique adventure.
Cod. | Connection | Connector | Micro Electret | PTT | Monitoring |
---|---|---|---|---|---|
N2C5 | Walkies FM: PMR, LPD, 2 Meters | miniXLR 5pin | |||
Electronics compatible with multiple FM Walkies that allows volume gain adjustment. | |||||
N2C5A | Walkies AM: Airband and Intercom | miniXLR 5pin | Walkie/radio actived monitoring | ||
It incorporates a specific preamplifier for Walkies AM Airband or aeronautical intercoms. | |||||
SIDETONE | Walkies FM and AM | miniXLR 6pin | |||
Communication system with completely redesigned electronics and SRM25i circuit to monitor the transmitted signal. It allows the connection of practically all walkies on the FM and AM market. (It does not allow the connection of aeronautical intercoms). |
The open-face helmet communication system with EN966 certification for Paramotor/PPG, ULM, Trike or Ultralight. Keep communication on flight connecting your FM Radio with our Mini-XLR cables, interchangeable to connect different radios or simply flying without communication. Built-in volume control, to adjust the microphone gain.
The Solar X 2 has been designed by Ignazio Bernardi, with the technical consultancy from the greatest Italian helmet developer.The result is a helmet with a very modern look.
The 2 pilots pilots Piccard and Borschberg of the Solar Impulse 2 have chosen this helmet because it is light, solid, reliable and it has the certification EN 966. We are very proud to have contributed to this incredible mission, so we called the helmet "SOLAR X" in honor of this unique adventure.
Helmet specs:
Made in Italy, in robust 3mm thick polycarbonate, lightweight but incredibly robust.
EN966 Airsports certification, tested by the Italian Newton laboratory, which guarantees maximum safety.
Optimized design down to the smallest detail, paying special attention to aerodynamics, and being able to open or close the air intake in the helmet with just one hand while flying.
Reinforced with one more layer of polycarbonate, with 2 channels with their holes between the shell and the polystyrene, to allow air flow.
With the pilot's comfort in mind, the chinstrap closure can be adjusted to the millimeter.
Possibility of attaching a polycarbonate windshield visor with anti-scratch and anti-fog treatment, in different colours.
Interchangeable inner padding: to replace it with another, adjust size or simply to wash it. Maximum hygiene and comfort, also allows to extend the useful life of the helmet.
Method to stich a strip of fabric around all the helmet. The result is just unique and beautiful
Certified helmet only with attached ear defenders or electronic headsets. Ear cups can be flipped upwards quickly and easily, and ventilate your ears whenever you like.
Available in a wide range of colors: Carbon optic, carbon white, orange, green, scratch gray, scratch blue.
Advanced NAC-Intercom communication system to connect all kind of radios and intercoms. Connection to FM Radios (2 meterss, PMR446, LPD443 or FRS/GMRS), AM Radios (VHF Airband) and Intercomms. Connection is established by an interchangeable, spiral shielded cable (to avoid any interference) and a Mini-XLR connector. Therefore, you can use this helmet with multiple different radios, replace it easily if damaged or simply do not plug it to avoid entanglements if you fly without a radio.
The microphone is very flexible and can rotate 270º so you can either place it on the left of right side. It also incorporates an electret noise cancel microphone with a windstopper foam cover.
Communication is activated by the PTT button (Push-to-Talk), which is placed on the outer part of the shell (You can choose the side where you would like it to be placed). The PTT button is wide and sensitive and has been made with silver contacts and a constant pressure for a flawless performance. The excellent quality of the communication is achieved thanks to the noise suppression obtained by a microphone that has been specifically designed for these purposes. If your walkie comes with a VOX system, then there is no need to press the PTT. Just talk to activate the transmission. (A special cable might be necessary but we strongly disapprove of using it to avoid an accidental activation of the transmission). Lastly, it is possible to choose a medium or high-attenuation ear defender depending on the intensity of the noise generated by the engine (OPII to medium attenuation and X5 to extreme attenuation).
Connect all kind of radios (FM and AM) as well as intercoms, through its miniXLR connector.
The interchangeable Mini-XLR, spiral shielded to avoid any interference, allows to use this helmet with multiple different radios, replace it easily if damaged or simply do not plug it to avoid entanglements.
Electret noise cancel microphone with windstopper foam cover, with flexible articulated boom 270º can position the headset in the right or left side.
Thanks to our experience of more than 14 years in the aviation sector, we have developed the perfect electronics for airsports, damping the noise of wind and engines, and enhancing the quality of communication.
Spiral shielded cable to avoid interferences, to use with multiple different radios, replace it easily if damaged or simply do not plug it to avoid entanglements.
Communication is activated by the PTT button (Push-to-Talk), placed on the outer part of the shell. Wide and sensitive button made with silver contacts and a constant pressure for a flawless performance.
The excellent quality of the communication achieved thanks to the noise suppression microphone that has been specifically designed for it.
Choose different ear protection according your activity: medium (OPII, 31db) or extreme (X5, 37db) attenuation.
The selected ear protectors are made for prolonged periods of use, keeping constant pressure and reducing heat accumulation.
Devices of the prestigious SENA brand, allows wireless connection to the mobile phone to listen to HI-FI music, make calls or intercommunicate with other helmets in tandem flight.
3M PELTOR OPII (31dB): developed for demanding noise-hazard environments and muffles even extremely low frequencies to a maximum degree. The sealing rings are filled with a unique combination of liquid and foam. The result is an optimum seal with low contact pressure, which provides snug comfort even during long-time use. The sealing rings have ventilation channels and are covered with soft, patterned, hygienic foil.
3M PELTOR X5 (37db): For use in extremely high-noise exposure environtments keeping a lightweight with excellent balance and comfort. Unique attenuation as a result of optimum combination of specially-formulated foam featured in the earcups, cushions and the innovative spacer and cup design, and a newly-designed spacer improving attenuation without excess bulk or weight.
Earcups tilt for optimum comfort and efficiency, wire headband offers comfortable pressure, a new special foam.. makes this groundbreaking ear protector a pleasure to wear during prolonged usage.